Why Simplisafe Doorbell Won’t Connect To WiFi and How To Fix It?

Sometimes, the WiFi for your SimpliSafe doorbell doesn’t work. This can be due to interference from a nearby router or other devices in your home that is prone to blocking signals. This article will give you all of the tips on how to fix a Simplisafe DoorBell when it is not connecting to WiFi.

Why is my SimpliSafe doorbell camera not connecting to WiFi?

There are a few reasons why your SimpliSafe doorbell camera may not be connecting to WiFi. One reason is that the Doorbell camera is disconnected from power. Another reason is that the Doorbell camera may be unable to read the QR code. Another possibility is that the camera has incorrect WiFi credentials, or that it is too far away from the WiFi router. If you are experiencing any of these issues, please try following these troubleshooting steps below:

How to fix Simplisafe Doorbell Won’t Connect to WiFi

It’s possible that your SimpliSafe doorbell camera is having problems with WiFi. If your Simplisafe Doorbell is not connecting to WiFi, there are a few troubleshooting steps you can take.

Take a look at the frequency of the signal your router is sending out. Make sure it isn’t sending it out on a 5 GHz frequency instead. SimpliSafe is set up to work with 2.4 GHz WiFi networks in order to cover more ground. 2.4 GHz networks can get through walls and floors much better than 5 GHz networks, which can’t.

If your SSID (wireless network name) and/or WiFi Password have changed recently, you will need to enter your password again on your keypad. For information on how to connect to and change your WiFi information, please check this page.

Both the name of the WiFi network and the password are now limited to 32 characters each. Make sure that your SSID is not hidden. Check your WiFi Router’s network settings to see if it’s there. If it is, make the WiFi network visible.

You can try powering down your base station and then reconnecting to see if this helps. In the event of a power outage, the base station should be able to run by drawing power from its rechargeable battery. It only works for 24 hours. This means that if your Simplisafe doorbell doesn’t get electricity for 24 hours after a power outage, it won’t work at all.

Restart your WiFi router and at the same time, move the Base Station close to your WiFi router.

Also Read: Why Amcrest Doorbell Won’t Connect To Wifi and How To Fix It


A bad WiFi connection is the most likely reason your Simplisafe doorbell won’t work. Do not worry if your Simplisafe doorbell isn’t working because a router is far away. Shorten the distance between your router and your Simplisafe doorbell to make it work. Your router or your doorbell should be closer to each other, but you can’t do both at once. In any case, you’d be able to bridge the gap and set up WiFi. Don’t be so rushed. We’ve only just begun. Getting a WiFi extender is a way to solve a problem with too little bandwidth. A WiFi extender will help your WiFi network get a better signal.

Finally, think about these things when you buy a WiFi extension to fix your Simplisafe doorbell not working. The extender must be able to use WiFi at 2.4GHz. It also needs to be able to give the new WiFi network a different name from the original WiFi network.