Why Is My Amcrest Doorbell Not Charging When Plugged In

When you first got your Amcrest Video Doorbell, it was super easy to install and set up. But now, after a few weeks of use when you need to charge the battery pack for the doorbell again, you realize your Amcrest video doorbell is no longer charging when plugged in. what is going on?

Charging problems can happen with any device that uses electricity; however, in our case, we are more concerned about why this could happen. You will find the step-by-step guide to solving the charging problems of your Amcrest Video Doorbell in this post. Read on!

Why is my Amcrest Video Doorbell not charging when plugged in?

There are a few potential reasons why your Amcrest doorbell may not be charging. It could be that you have outdated firmware, the charger is faulty, the Amcrest app is outdated, or the battery is spoilt. Try updating your firmware, using a different charger, updating the Amcrest app, and replacing the battery to see if that fixes the issue.

What to do when your Amcrest Doorbell is not charging? – Quick Amcrest Doorbell Troubleshooting Tips

There are a number of things you can do when your Amcrest Doorbell is not charging. you can try some of the following solutions:

  • Check that the battery in the doorbell is inserted correctly
  • Make sure the Wi-Fi connection is strong and stable
  • Restart your router
  • Disconnect other devices that are using a lot of bandwidth

If none of those solutions works, you may need to contact customer support. They will be able to help you resolve the issue and get your Amcrest Doorbell up and running again.

How to Fix Amcrest Doorbell Not Charging

Check if your Doorbell Charger is Faulty

It is likely that there is a problem with your doorbell charger. First, you should check if the power cord for the charger has any damage or frays in it. If so, you should replace the cord. Next, check if you have a power outage in your home which has caused this issue.

Check if your Amcrest doorbell battery is Dead

The Amcrest doorbell may not charge because the battery is dead. If you find that the battery is low, you will need to charge it; else, you need to replace it immediately. To do this, open up the back of the doorbell and locate the battery.

Ensure your Amcrest Doorbell Firmware is not outdated

You can check for updates by going to Settings in the Amcrest app and selecting Device Firmware. If an update is available, follow the on-screen instructions to install it.

Update your Amcrest App

The Amcrest Doorbell is a great camera and doorbell. However, if it’s not charging then you may need to update the app so that your device can work properly.

Check your Internet Connections

Make sure that you are connected to the internet and that your router is working properly. If there are any issues with your internet connection, please contact your internet service provider for assistance.

Reset Your Amcrest Video Doorbell Camera

Reset the doorbell by opening the Reset/MicroSD flap on the back and looking for the “Reset” hole that is located there. After inserting a safety pin or other similar device, push down on the reset button until it tells you that it is hard resetting. Once you’ve released the reset button, you’re ready to start.

How do I recharge my AMCREST doorbell?

Open the micro USB power port cover using a Flathead screwdriver or your fingernail to charge your Amcrest doorbell camera. Connect the camera’s micro USB power connector to the provided micro USB charging cable. The charging process might take up to three hours (100 percent ). The green LED on the front of the camera will remain solid after the camera is done charging. Once the camera has finished charging, just disconnect the micro USB power cord.