Why Arlo Video Doorbell Won’t Connect To WiFi and How to Fix It.

The Arlo doorbell is an amazing device, but sometimes it can get blocked from connecting to your WiFi. This article will show you how to fix the Arlo doorbells when they don’t connect to your WiFi.

Why Arlo Doorbell Won’t Connect To Wifi?

There are a few reasons why your Arlo Video Doorbell might not be connecting to your WiFi. The most common reason is that your internet is unstable or you have the wrong credentials and buggy software. It’s also possible that the setup process was not done properly.

Arlo Doorbells are a great way to keep an eye on your home, but sometimes they can run into some WiFi connectivity issues. If you’re having trouble getting your Arlo doorbell to connect to WiFi, don’t worry! We’ve got a few solutions for you.

How to fix Arlo Essential Wireless video doorbell not connecting to WiFi?

1. Check Your Internet Connection

There are a few ways that you can check your internet connection. One way is to use your smartphone. If you have a strong mobile signal, then the internet connection will be good. Another way to check is by going to google and typing in “internet speed test.” You can also check your Wi-Fi connection by looking for the Wi-Fi symbol at the top of your screen. If it has four bars, then the signal is considered strong. Make sure that you are connected to the internet and that your Arlo Doorbell is within range of your router.

There are two Wi-Fi frequency bands: 2.4GHz and 5GHz. Most routers support both frequencies, but your Arlo camera must be set to the same frequency as your router. If you’re not sure which frequency your Wi-Fi network uses, check the documentation that came with your router or contact your Internet service provider. If you are still having trouble connecting to your Arlo Doorbell, please contact our Customer Support team for assistance.

2. Check the Arlo Device’s Network

First, check the network by opening your browser and typing in the IP address for your camera. If you see a live video feed, then the camera is connected to the network and it’s likely an issue with either your router or internet service provider (ISP). Unplug your router from power for at least one minute before plugging it back in. Then unplug your Arlo device from power for at least one minute before plugging it back in. After both devices have been reset, try connecting them again.

3. Check the Location of Your Wi-Fi Router

The Arlo doorbell camera must be within range of the wireless signal in order to connect. If you are unsure of the location of your router, try using a site like Wi-Fi Analyzer to help you find the best spot for your camera.

4. Check Your Bandwidth

If you are experiencing WiFi connectivity problems with your Arlo devices, it is likely because your internet connection is not fast enough. Each individual Arlo device has a specific bandwidth requirement, so make sure that you are providing enough for all of them.

5. Update to the Latest Version of the App

Arlo Video Doorbells are only compatible with the latest versions of iOS and Android. Make sure to keep your devices up-to-date so you can take advantage of the latest features and enhancements. If you’re experiencing issues connecting your doorbell to the base station, check for a firmware update on Arlo’s website.

First of all, make sure you have the latest version of the Arlo app installed on your device. To do this, open the Google Play or App Store and type ‘Arlo app’ in the search bar. Then, click on the Arlo app in the search results and click on the Update button at the top of the screen to download the latest version of the app from the website.

6. Reset your Arlo doorbell Camera

If you need to reset your Arlo video doorbell for any reason, you can do so by restoring its factory settings.

  1. Use a paper clip or pin to press and hold the reset button on your video doorbell. The reset button is located inside the hole at the back of the doorbell until it flashes quickly.
  2. Once it’s flashing, release the reset button and wait for your Arlo doorbell to restart.

Also Read: Why Ring Doorbell Won’t Connect To Wifi?

How to fix Arlo Video Doorbell that won’t connect to 2.4GHz wifi network.

If you’re having trouble connecting your Arlo Video Doorbell to a 2.4 GHz wifi network, don’t worry, you’re not alone! Many people have experienced this same issue. The good news is that there are a few things you can do to try and fix it.

Ensure you type in the correct Wifi username and password

If you are trying to connect to a 2.4 GHz wifi network, make sure that you type in the correct wifi username and password. If your Arlo Video Doorbell is flashing red light, it means that you have not entered the correct WiFi username and password. Make sure that you are typing in the exact credentials for your network and try again. If you are still having trouble connecting after verifying your information, please contact Arlo Support for assistance.

Reset your Arlo video doorbell camera

If your Arlo doorbell camera is not connecting to your 2.4GHz wifi network, you may need to reset the device. To do this, press and hold the Sync button on the back of the camera for 10 seconds until the LED light turns blue. The camera will then restart and attempt to connect to your network.

If you’ve tried all of these solutions and are still having problems connecting your Arlo doorbell to WiFi, contact allow support for help! Their tech experts have tons of experience solving these types of issues and will be happy to assist you.