Ring Doorbell Not Charging Flashing Blue Light: Quick Fix!

Welcome to the world of modern home security, where Ring Doorbells have taken the market by storm. These sleek and handy devices have made it easier than ever to keep an eye on your property, but what happens when your Ring Doorbell starts flashing blue light and refuses to charge?

As a homeowner, this can be a frustrating and concerning situation, but fear not! In this blog post, we will give you the quick fix you need to troubleshoot your Ring Doorbell and get it back up and running.

So, grab your toolbox, and let’s dive into the world of Ring Doorbell not charging but flashing blue light solutions!

Why is my Ring Doorbell not charging but Flashing Blue Light?

If your Ring Doorbell is flashing a blue light instead of charging, it could be due to a few reasons. One of the most common reasons is a cold battery. If the temperature outside is too low, the battery may not charge until it has warmed up.

Similarly, if the temperature is too high, the device may need to cool down before it can charge properly. Another reason could be the way the device is being charged. If it’s being charged on something other than a direct power source, such as a computer or battery block charger, it may not charge properly.

If you’re experiencing this issue, try plugging the device directly into a wall socket or extension lead USB socket to see if that helps. If you’re still having trouble, it may be best to contact Ring’s support team for further assistance.

How to fix the Ring Doorbell that does not charge but flashes blue light

Check the Status of your Ring Doorbell When Charging

To check the status of your Ring Doorbell when charging, start by:

  1. Opening the Ring app on your mobile device.
  2. Tap on the menu lines in the top left corner, then select “Devices” and choose the Ring doorbell you want to check.
  3. Tap on “Power Settings,” then “Battery Status,” and finally “Battery Level.”
  4. The battery level will be displayed on the top right side of the page.
  5. If there are no Power Settings on your app, go to “Device Health” to check the camera‚Äôs battery life.

If you encounter any issues with charging, try refreshing the battery status in the Ring app by pressing the button on your Ring Doorbell a few times. If the blue light doesn’t shut off after a few hours of being plugged in, there might be an issue with either the battery or charger.

Depending on whether the USB cord is plugged into a USB port or power outlet, a Ring Video Doorbell typically takes roughly five to ten hours to fully charge.

How to fix the Ring Doorbell that does not charge but flashes blue light

Get a Ring Doorbell that can withstand extreme cold weather conditions

When choosing a Ring Doorbell that can withstand extreme cold weather conditions, you should look for models that are specifically designed for harsh environments. These models are equipped with features that enable them to operate in freezing temperatures.

Look for models with a higher IP rating, which indicates that they are more resistant to water, dust, and extreme temperatures. Choose a Ring Doorbell that has a hardwired power supply to ensure that it continues to function even in cold weather.

It is also important to choose a model that has a high-quality lithium-ion battery that can hold a charge efficiently in cold temperatures. As well, consider choosing a Ring Doorbell with a motion detection feature that can be adjusted to reduce the number of alerts you receive during the winter months.

By following these tips, you can choose a Ring Doorbell that can operate effectively in extreme cold weather conditions.

Use indoor temperature for your Ring doorbell camera to charge properly

To ensure your Ring doorbell camera charges properly, bring it inside when the temperature drops too low for the battery to hold a charge. Extreme cold weather can negatively impact the lithium-ion battery, causing it to drain faster or stop working altogether.

To maintain a suitable indoor temperature, charge the battery to 100% indoors before mounting it outside again. If you’re having issues with your Ring not charging, bring the entire unit inside to charge and keep a closer eye on its charge when outdoor temperatures are low.

Try a factory reset to your Ring doorbell camera

If your Ring doorbell camera is not charging and is flashing a blue light, performing a factory reset may fix the issue. Here are the steps you can follow to reset your device:

  1. Check Wi-Fi connectivity and recharge the battery before resetting the device.
  2. Locate the setup button on your Ring doorbell camera. The location of the setup button depends on the model of your device.
  3. Press and hold the setup button for at least 30 seconds.
  4. Release the button and wait for the device to flash and restart.
  5. After the device has restarted, press the setup button again to set up your Ring doorbell camera from scratch.

Precautions:

  • Performing a factory reset will erase all settings on your device.
  • Make sure to set up your Ring doorbell camera again from the Ring app once it’s been reset.

By following these steps, you can perform a factory reset on your Ring doorbell camera and fix the issue of not charging but flashing blue light. If the issue persists, contact Ring customer support for further assistance.

Replace the Battery

If your Ring Doorbell is flashing a blue light and not charging, it might be time to replace the battery. Here’s a step-by-step guide on how to replace the battery:

  1. Purchase a new Ring battery from the Ring website or a retailer.
  2. Use a star-shaped screwdriver to remove the security screw on the bottom of the Ring Doorbell.
  3. Gently remove the faceplate by pushing it upwards with your fingers.
  4. Use one finger to press the black rectangular tab at the top of the battery and slide it out using your other fingers.
  5. Dispose of the old battery properly, and make sure to keep the existing tape if it’s still attached to the plate.
  6. Insert the new battery and make sure the red wires are facing the outside exposed wire on the connector facing upward.
  7. Reattach the faceplate and screw it back in using the security screw.
  8. Recharge the new battery using the USB cable that came with the Ring Doorbell.

Remember to handle the battery with care and dispose of it properly. Use safety measures such as wearing gloves and goggles and keeping the battery away from heat sources.

Contact Ring Customer Support

To get assistance with a Ring Doorbell that won’t charge but has a flashing blue light, call Ring customer support. Make sure to have your documentation ready, including the model number of your product.

Before calling, troubleshoot the issue by checking the charging cable and outlet. If the problem persists, the agent may suggest a replacement or return. Be polite and patient during the call, and take note of any instructions given.

Why is my ring doorbell flashing blue when charging?

A Ring Doorbell may flash a blue light when charging, indicating that the device is receiving power and is in the process of charging. However, if the blue light continues to flash for more than 4 hours, it could indicate a problem with the power source or a faulty battery.

Troubleshooting steps include checking the power source, resetting the device, or replacing the battery. It is recommended to plug the device into a standalone wall outlet to exclude the possibility of a failed outlet or power outages.

If the blue light rapidly flashes and then turns white, it means that the device has successfully connected to a network.

Should the Ring Doorbell Blink Blue When Plugged In?

Yes, the Ring Doorbell will blink blue when plugged in to indicate that it is charging. This is a normal indication and there is nothing to worry about. If you want to disable this feature, you can do so in the mobile app.

How To Tell If a Ring Doorbell Is Charging?

To check if your Ring Doorbell is charging, look for a flashing blue light on the device’s face. The blue light indicates that the battery is being charged and the device is ready for use. For first and second-generation Ring Doorbells, insert the charging cable behind the doorbell to charge the battery.

The circle light on the device will fill up steadily to indicate an increase in battery life, and when the battery is fully charged, the light on the doorbell will turn solid blue.

To check the current battery level, open the Ring App, select your Ring device, and the battery level will be displayed on the top right side of the page.

If you have a Ring Doorbell Pro, it will automatically start charging upon setup with the top half of the LED blinking blue, which will turn off once it’s done charging.

FAQ

Will The Blue Light Of My Doorbell Stay On?

The blue light on a Ring Doorbell will stay on and is intended for security and safety purposes. It helps provide a better view of your property at night, allowing you to detect non-desirable people and intruders. It can also fake your presence and warn off intruders when you’re not home.

As well, the blue light can alert animals and keep them away from your property in rural areas. The blue light may flicker while the device is charging, but this is not an issue and can be disabled in the mobile app. If the blue light does not blink or won’t turn off, it’s best to contact Ring support.

What does it mean when your Ring Doorbell is flashing blue while charging?

The Ring Doorbell flashing blue light indicates that the device is charging, updating, or reconnecting. If the blue light is flickering even when the device is not performing any of these tasks, it may indicate an issue with the battery or charger.

Why is my Ring battery camera flashing blue?

If your Ring battery camera is flashing blue, it could indicate a low battery or a problem with the power source. Here are some troubleshooting steps to solve the issue:

  1. Check the battery level: If your Ring camera is battery-operated, the flashing blue light could mean that the battery is low and needs to be charged. To do this, remove the camera from its mount and plug it into a USB charger using the included cable. Wait for the battery to charge before remounting the camera.
  2. Restart the device: Sometimes a simple restart can fix the issue. Press and hold the setup button on the back of the camera for 20 seconds until the light turns off, then release the button and wait for the camera to restart.
  3. Check the power source: If your Ring camera is hardwired, the flashing blue light could indicate a problem with the power source. Check the wiring and make sure that the camera is receiving power from the outlet. If the outlet is not working, try plugging the camera into a different outlet or use a standalone wall outlet.
  4. Check the WiFi connectivity: If the flashing blue light persists after restarting the device, check the WiFi connectivity. Make sure that your camera is connected to a strong and stable WiFi network.